Temperature Sensor

Description

The TS5111 and TS5110 device incorporate thermal sensing capability which is controlled and read over two wire bus. These device operate on I2C and I3C two wire serial bus interface. The TS5 designed for Memory Module Applications. The TS5 device intended to operate up to 12.5 MHz on a I3C Basic Bus or up to 1 MHz on a I2C Bus.

All TS5 devices respond to specific pre-defined device select code on the I2C/I3C Bus.

Features

  • Two wire bus serial interface (I2C and I3C Basic operation modes)
  • Up to 12.5 MHz transfer rate
  • Packet Error Check (PEC) Function
  • Parity Error Check Function
  • Bus Reset Function
  • Two unique addresses selected by SA pin
  • In-band Interrupt (IBI)
  • Supported I3C Basic Common Command Codes (CCC)
    • ENEC
    • DISEC
    • RSTDAA
    • SETAASA
    • GETSTATUS
    • DEVCAP
    • SETHID
    • DEVCTRL

Block Diagram

SPD5 Block Diagram

Application

  • DDR5 DIMM Application Environment
  • Memory Module Application

Deliverables

  • Verilog Source code
  • User Guide
  • IP Integration Guide
  • Simulation Script
  • Synthesis Script
  • Encrypted UVM Verification Environment
  • cocotb Verification Environment
  • Basic Testsuite
  • Firmware code